| Author |
Message |
 kenSenior Member
Posts: 584
Joined: 05 Jan 2008
Location: Phila.,Pa.
|
|
 Posted: Sat Jan 02, 2010 7:43 am |
 |
|
Happy New Year to all.Can someone do an overlay for me to see if mm is in the right position for this ddo  Thank you
|
|
|
|
|
 |
 DickExpert Member
Posts: 5780
Joined: 21 Sep 2006
Location: Rialto, CA.
|
|
| Posted: Sat Jan 02, 2010 1:15 pm |
|
|
Ken, I can't be sure, what with the rotatesd position, but IMHO the MM is too low. The -005, shows the MM, above the level of the tail of the "9". Your MM is below that level. Let's see what Bob thinks.Looking again, It looks like you might have a new one!
Dick
_________________
" Deja Moo: The feeling that you've heard this bull before".
|
|
|
|
|
|
 Bob PSite Admin
Posts: 3482
Joined: 01 Jul 2003
Location: Niceville, Florida
|
|
| Posted: Sat Jan 02, 2010 5:51 pm |
|
|
I agree with Dick in that this mintmark is too low to be the DDO-005. I also can't make out if this is a doubled eyelid or not. Is the black speck where the doubled eyelid is?
_________________
Bob Piazza
Site Admin/Moderator
Attributer/Photographer
bobp@coppercoins.com
mustbebob1@gmail.com
|
|
|
|
|
|
kenSenior Member
Posts: 584
Joined: 05 Jan 2008
Location: Phila.,Pa.
|
|
| Posted: Sun Jan 03, 2010 8:58 am |
|
|
Hi Guys,The black speck was the area in question,but after Dicks' reply(mm position) I got out my toothpick and the speck came off  .Therefore it's nothing.It did look like a doubled eyelid or a chip when I looked at it with a loop as the speck was copper color in hand.Got a couple old coppers in yesterday,I'll statr another thread on them.They have Sheldon/Breen #'s on them and I'm not sure what they are.I'll post for some help on them.Thanks for the help gents.Ken
|
|
|
|
|
|
|
