ddorpmAdvanced Member
Posts: 101 Joined: 05 Mar 2005
|
|
Posted: Wed Jul 06, 2005 6:31 pm |
|
|
Hi All,
A while back -- Bob, Chuck and I researched together on a 1994 1c that exhibited a rotated reverse. Subsequently, we were able to surmise that this coin might be caused by a loose die that was continually rotating. An article about the coin was published on the front cover of the May 10, 2005 issue of Numismatic News. That article generated a response from an NN reader out of NY who informed me he also had a 1994 cent with a rotated reverse. To make a long story shorter -- he sent me his coin, and after examining side-by-side with my specimen -- both were from the same exact pair of dies. His was rotated exactly 180 degrees (medal alignment) with mine rotated around 165 degrees area. Therefore -- we were able to definitively prove this particular rotated error was from a loose die.
I sent the coin in to NGC for grading and encapsulation along with a few others. This was my first ever submission to NGC. The overwhelming majority of my coins have normally been submitted to ANACS. Below is the result. I was very pleased with NGC and their service. All my coins, at least from my personal grading prior to submission; came out either right on the grade or I was one grade point too low. All coins also had the correct variety/error attribution annotation on the holder insert.
Though this 1994 1c rotated reverse is not an earth-shattering major error type -- nonetheless, since it was retrieved out of circulation, the interesting story behind it, along with the research help from Bob Piazza and Chuck Daughtrey; the coin holds a special meaning for me. The working together, sharing knowledge and experience is what really makes our hobby so special and so enjoyable. Thanks guys...
----------------
Regards,
Billy
|
|
|