coppercoins.com
 
Index div  FAQ  div  Search  div  Memberlist  div  Usergroups  div  Register  div  Log in 
back to coppercoins home
Username:    Password:      Log me on automatically each visit    
coppercoins.com Forum Index arrow Error Coin Questions arrow Die Clash

Die Clash
Post new topic   Reply to topic
Author Message

Willie-E
New Member
New Member

Posts: 5
Joined: 24 Apr 2006
Location: Naples Fl.
PostPosted: Sat Apr 29, 2006 9:55 am Reply with quote

I have found a few what look to be die clash errors on the obverse of the 2006 P coins while looking for other things.
First coin - larger die clash (from the memorial ?)




2nd Coin Minor die clash ( from part of a column ?)



My question is am I correct in my diagnosis of the coins?

Thanks
Willie-E
View user's profile Send private message

coppercoins
Site Admin
Site Admin

Posts: 2809
Joined: 29 Jun 2003
Location: Springfield, Missouri.
PostPosted: Sat Apr 29, 2006 12:02 pm Reply with quote

Neither of those are die clashes. The first thing as a rule on die clashes is that they generally ONLY affect the field of the coin, since that's the highest part of the die. A clash, unless really severe will never affect the higher relief of the coin.

Your two examples are most likely a planchet defect having to do with trapped gas under the copper plating that has no place to go when the coin is struck.

At any rate, these are a mere conversation piece and generally do not warrant any premium value. In fact, most "errors" are within tolerance and released on purpose if the coin is the right size, shape, and weight....which yours almost certainly are.

Wrong metal, unplated coins, and other related items are usually the wrong weight and should not be released.

Wrong planchets, clips, broadstrikes, indents, brockages, etc. are almost always either the wrong weight or size and should not have been released.

Plating split, gas bubbles, weak strikes, etc. are usually the correct size and shape and weight, thus the mint generally does not view them as unusable scrap...thus they are more common in circulation and carry a far lower value.

_________________
C. D. Daughtrey
owner, developer
www.coppercoins.com
cd@coppercoins.com
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger

murphy
Senior Member
Senior Member

Posts: 573
Joined: 02 Sep 2004
Location: New Albany, Indiana USA
PostPosted: Sat Apr 29, 2006 7:22 pm Reply with quote

You might sell it on Ebay as a Speared Lincoln.
_________________
~ Murph ~
View user's profile Send private message Send e-mail

wavysteps2003
Expert Member
Expert Member

Posts: 1344
Joined: 25 Feb 2005
PostPosted: Wed May 03, 2006 7:45 pm Reply with quote

Chuck is 100 % right about trapped gas under the layer of copper and the large line going across Lincoln fits right in with what he has said.

The line that is coming off the 2 of 2006 may fall into a different category. They are what I am calling "tails" and have occurred on more than one die. These are mostly seen on the reverse of the Lincoln cent from years starting in 1994 up until the present. There is a discussing going on presently that address these "tails" concerning how they are formed and if they have any connection to wavy steps. Hopefully, we will know more in the future about these odd line.



This is a picture of another 2006 Lincoln cent that shows a similar line from the 2 of the date.

WAVYSTEPS2003
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic
Page 1 of 1
coppercoins.com Forum Index arrow Error Coin Questions arrow Die Clash




coppercoins.com © 2001-2005 All times are GMT - 6 Hours