| Author |
Message |
 coppersleuthAdvanced Member
Posts: 119
Joined: 21 Jul 2006
|
|
 Posted: Sun Aug 05, 2007 7:05 am |
 |
|
Take a peek at the second pillar to the right of Lincoln. I am having a hard time figuring out what this is. It almost appears that something "folded over". Could a die gouge cause such as nicely rounded and proportioned feature, especially the part that is extending onto the flat field area? Thanks
|
|
|
|
|
 |
 Bob PSite Admin
Posts: 3482
Joined: 01 Jul 2003
Location: Niceville, Florida
|
|
| Posted: Sun Aug 05, 2007 8:54 am |
|
|
This anomaly has all the earmarks of a gas bubble. Try to very carefully push down on the area with something like a toothpick to see if the area collapses somewhat. By the way, very nice photos on all of these. It really makes it easy to diagnose what you may have here.
_________________
Bob Piazza
Site Admin/Moderator
Attributer/Photographer
bobp@coppercoins.com
mustbebob1@gmail.com
|
|
|
|
|
|
mikediamondAdvanced Member
Posts: 191
Joined: 09 Oct 2003
Location: Western Illinois
|
|
| Posted: Sun Aug 05, 2007 12:43 pm |
|
|
While a gas bubble is possible, it looks more like die damage to me, most probably a die dent. Like most die dents, I haven't a clue what caused it.
_________________
President of CONECA; Host of Error Coin Information Exchange (Yahoo:Groups). Opinions rendered do not necessarily reflect those held by any organization I am a member of.
|
|
|
|
|
|
 DickExpert Member
Posts: 5780
Joined: 21 Sep 2006
Location: Rialto, CA.
|
|
| Posted: Sun Aug 05, 2007 1:35 pm |
|
|
Sure looks like a gas bubble to me. I have seen a lot of them, and the first thing I try is to gently flatten them. If it is hard, then some other cause is apparent. But if it flattens, then you have your answer.
Dick
_________________
" Deja Moo: The feeling that you've heard this bull before".
|
|
|
|
|
|
 eagamesExpert Member
Posts: 3013
Joined: 15 Nov 2005
|
|
| Posted: Sun Aug 05, 2007 1:56 pm |
|
|
Looks like a gas bubble to me too 
_________________
Ed
|
|
|
|
|
|
 coopExpert Member
Posts: 3402
Joined: 17 Sep 2003
Location: Arizona
|
|
| Posted: Mon Aug 06, 2007 10:20 am |
|
|
It could be what is wearing from a die clash that has a target in that area?
The throat and jaw touch in that area of the columns. Just another suggestion of what may have happened in that area.
_________________
Richard S. Cooper
You may be only one person in the world, but you may also be the world to one person.
|
|
|
|
|
|
DickExpert Member
Posts: 5780
Joined: 21 Sep 2006
Location: Rialto, CA.
|
|
| Posted: Mon Aug 06, 2007 11:46 am |
|
|
Coop, thanks for doing what I was wishing. The post of the clash area(s) still makes me think it is only a gas bubble. As I suggested, use a toothpick and gently press the bubble down. If indeed it is a bubble, it will conform to the general area shape. If it resists movement, then you have your answer. IMHO,
Dick
_________________
" Deja Moo: The feeling that you've heard this bull before".
|
|
|
|
|
|
coppersleuthAdvanced Member
Posts: 119
Joined: 21 Jul 2006
|
|
| Posted: Mon Aug 13, 2007 6:13 am |
|
|
gas it is, boys! I tried pressing on it with a match stick (non-sulfur end, of course  ) and it flattened out, just like many of you said. Excellent helpful suggestion that I can try in other similar situations. Thanks much!!
|
|
|
|
|
|
Bob PSite Admin
Posts: 3482
Joined: 01 Jul 2003
Location: Niceville, Florida
|
|
| Posted: Mon Aug 13, 2007 3:19 pm |
|
|
Cool...I get two points added to my 'good guess' folder 
I am glad you were able to determine what it was, and I am also glad for all the responses received. You guys are the best!!
_________________
Bob Piazza
Site Admin/Moderator
Attributer/Photographer
bobp@coppercoins.com
mustbebob1@gmail.com
|
|
|
|
|
|
|
